Reference Guide

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.2.(0.0) Added support for keyword snooping on the Z9000,
S4810, and S4820T.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series.
E-Series legacy
command
Related
Commands
show ip pim tib — shows the PIM tree information base.
ip mroute
Assign a static mroute.
S5000
Syntax
ip mroute [vrf vrf-name] destination mask {ip-address | null 0|
{{bgp| ospf} process-id | isis | rip | static} {ip-address |
tag | null 0}} [distance]
To delete a specific static mroute, use the no ip mroute destination mask
{ip-address | null 0| {{bgp| ospf} process-id | isis | rip |
static} {ip-address | tag | null 0}} [distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute
destination mask command.
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to assign a static mroute to that VRF.
NOTE: Applies to specific VRF if input is provided, else
applies to Default VRF.
destination Enter the IP address in dotted decimal format of the
destination device.
Multicast
1389