Reference Guide

Field Description
BGP router
identifier
Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table
version.
network entries Displays the number of network entries, route paths, and
the amount of memory used to process those entries.
BGP path attribute
entries
Displays the number of BGP path attributes and the amount
of memory used to process them.
BGP AS-PATH
entries
Displays the number of BGP AS_PATH attributes processed
and the amount of memory used to process them.
BGP community
entries
Displays the number of BGP COMMUNITY attributes
processed and the amount of memory used to process
them. The show ip bgp ipv6 unicast community
command provides more details on the COMMUNITY
attributes.
Dampening
enabled
Displayed only when dampening is enabled. Displays the
number of paths designated as history, dampened, or
penalized.
Neighbor Displays the BGP neighbor address.
AS Displays the AS number of the neighbor.
MsgRcvd Displays the number of BGP messages that neighbor
received.
MsgSent Displays the number of BGP messages that neighbor sent.
TblVer Displays the version of the BGP table that was sent to that
neighbor.
InQ Displays the number of messages from that neighbor
waiting to be processed.
OutQ Displays the number of messages waiting to be sent to that
neighbor. If a number appears in parentheses, the number
represents the number of messages waiting to be sent to
the peer group.
Up/Down Displays the amount of time (in hours:minutes:seconds) that
the neighbor is in the Established stage. If the neighbor has
never moved into the Established stage, the word never is
displayed.
State/Pfx
If the neighbor is in Established stage, the number of
network prefixes received.
IPv6 Border Gateway Protocol (IPv6 BGP)
1191