Reference Guide

Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Related
Commands
neighbor peer-group (assigning peers) – assigns a peer to a peer-group.
neighbor peer-group (creating group) – creates a peer group.
show ip bgp ipv6 unicast summary
Allows you to view the status of all BGP connections.
Syntax
show ip bgp ipv6 unicast summary
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
The following describes the show ip bgp ipv6 unicast summary command
shown in the Example below.
1190
IPv6 Border Gateway Protocol (IPv6 BGP)