Reference Guide

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
show ip bgp ipv6 unicast community
View information on all routes with community attributes or view specific BGP community groups.
Syntax
show ip bgp ipv6 unicast community [community-number] [local-
as] [no-export] [no-advertise]
Paramters
community-
number
Enter the community number in AA:NN format where AA is
the AS number (2 bytes) and NN is a value specific to that
autonomous system. You can specify up to eight community
numbers to view information on those community groups.
local-AS Enter the keywords local-AS to view all routes with the
COMMUNITY attribute of NO_EXPORT_SUBCONFED. All
routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03)
community attribute must not be advertised to external BGP
peers.
no-advertise Enter the keywords no-advertise to view all routes
containing the well-known community attribute of
NO_ADVERTISE. All routes with the NO_ADVERTISE
(0xFFFFFF02) community attribute must not be advertised to
other BGP peers.
no-export Enter the keywords no-export to view all routes containing
the well-known community attribute of NO_EXPORT. All
routes with the NO_EXPORT (0xFFFFFF01) community
attribute must not be advertised outside a BGP
confederation boundary.
Command
Modes
• EXEC
• EXEC Privilege
1180
IPv6 Border Gateway Protocol (IPv6 BGP)