Reference Guide

summary-only (OPTIONAL) Enter the keywords summary-only to advertise
only the aggregate address. Specific routes are not
advertised.
suppress-map
map-name
(OPTIONAL) Enter the keywords suppress-map then the
name of a configured route map to identify which more-
specific routes in the aggregate are suppressed.
Defaults Not configured.
Command
Modes
ROUTER-BGPV6-ADDRESS FAMILY
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
At least one of the routes included in the aggregate address must be in the BGP
routing table for the configured aggregate to become active.
Do not add the as-set parameter to the aggregate. If routes within the aggregate
are constantly changing, the aggregate flaps to keep track of the changes in the
AS_PATH.
In route maps used in the suppress-map parameter, routes meeting the deny
clause are not suppress; in other words, they are allowed. The opposite is true:
routes meeting the permit clause are suppressed.
If the route is injected using the network command, that route stills appear in the
routing table if the summary-only parameter is configured in the aggregate-
address
command.
The summary-only parameter suppresses all advertisements. If you want to
suppress advertisements to only specific neighbors, use the
neighbor
distribute-list command.
1158
IPv6 Border Gateway Protocol (IPv6 BGP)