Reference Guide

Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp
ipv6 unicast summary
command. The text line above the route table states the
number of COMMUNITY attributes found.
The show ip bgp ipv6 unicast community command without any
parameters lists BGP routes with at least one BGP community attribute and the
output is the same as for the show ip bgp ipv6 unicast command output.
show ip bgp ipv6 unicast filter-list
View the routes that match the filter lists.
Syntax
show ip bgp ipv6 unicast filter-list as-path-name
Parameters
as-path-name Enter the name of an AS-PATH.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
1142
IPv6 Border Gateway Protocol (IPv6 BGP)