Reference Guide

show ip bgp ipv6 unicast community-list
View routes that are affected by a specific community list.
Syntax
show ip bgp ipv6 unicast community-list community-list-name
[exact-match]
Paramters
community-
list-name
Enter the name of a configured IP community list.
exact-match (OPTIONAL) Enter the keywords exact-match to display
only for an exact match of the communities.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
show ip bgp ipv6 unicast dampened-paths
View BGP routes that are dampened (non-active).
Syntax
show ip bgp ipv6 unicast dampened-paths
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1140
IPv6 Border Gateway Protocol (IPv6 BGP)