Reference Guide

Version 7.4.1.0 Introduced on the E-Series TeraScale.
show capture bgp-pdu neighbor
Display BGP packet capture information for an IPv6 address.
Syntax
show capture bgp-pdu neighbor ipv6-address
Parameters
ipv6-address Enter the IPv6 address (X:X:X:X::X) of a BGP neighbor.
Defaults
• EXEC
• EXEC Privilege
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Related
Command
capture bgp-pdu neighbor (ipv6) – enables capture of an IPv6 BGP neighbor
packet.
capture bgp-pdu max-buffer-size – specifies a size for the capture buffer.
IPv6 Border Gateway Protocol (IPv6 BGP)
1135