Reference Guide

• ? (question mark) matches sequences in a pattern (0 or 1
sequences)
• [ ] (brackets) matches a range of single-character
patterns.
• ^ (caret) matches the beginning of the input string. (If the
caret is used at the beginning of a sequence or range, it
matches on everything BUT the characters specified.)
• $ (dollar sign) matches the end of the output string.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
If you enter the clear ip bgp ipv6 flap-statistics command without
parameters, all the statistics clear.
Related
Commands
show ip bgp ipv6 unicast flap-statistics – views BGP flap statistics.
clear ip bgp ipv6 unicast soft
Clear and reapply policies for IPv6 unicast routes without resetting the TCP connection; that is, perform
BGP soft reconfiguration.
Syntax
clear ip bgp {* | as-number | ipv4-neighbor-addr | ipv6-
neighbor-addr | peer-group name} ipv6 unicast soft [in | out]
Parameters
* Clear and reapply policies for all BGP sessions.
as-number Clear and reapply policies for all neighbors belonging to the
AS. The range is from 0 to 65535 (2 Byte), from 1 to
4294967295 (4 Byte), or from 0.1 to 0.65535.65535 (Dotted
format).
1090
IPv6 Border Gateway Protocol (IPv6 BGP)