Reference Guide

2| 1| IPv4Flow| 232| 0|
Allowed
2| 1| IPv6Flow| 0| 0|
Allowed
4| 0| IPv4Flow| 232| 0|
Allowed
4| 0| IPv6Flow| 0| 0|
Allowed
Dell#
Dell#test cam-usage service-policy input LauraMapTest linecard
4 port-set 0
Linecard|Portpipe|CAM Partition|Available CAM|Estimated CAM
per Port|Status
-------------------------------------------------------------
4| 0| IPv4Flow| 232| 0|
Allowed
4| 0| IPv6Flow| 0| 0|
Allowed
Dell#
Dell#test cam-usage service-policy input LauraMapTest linecard
2 port-set 1
Linecard|Portpipe| CAM Partition|Available CAM|Estimated CAM
per Port|Status
---------------------------------------------------------------
--
2| 1| IPv4Flow| 232| 0|
Allowed
2| 1| IPv6Flow| 0| 0|
Allowed
Dell#
IPv6 Route Map Commands
The following commands allow you to configure route maps and their redistribution criteria.
match ipv6 address
Configure a filter to match routes based on IPv6 addresses specified in an access list.
C-Series, E-Series, S-Series
Syntax
match ipv6 address prefix-list-name
To delete a match, use the no match ipv6 address prefix-list-name
command.
Parameters
prefix-list-
name
Enter the name of IPv6 prefix list, up to 140 characters.
1030
IPv6 Access Control Lists (IPv6 ACLs)