Reference Guide

Parameters
access-list-
name
Enter the name of the ACL to be displayed, up to 140
characters.
cam_count List the count of the CAM rules for this ACL.
interface
interface
Enter the keyword interface followed by the interface
type and slot/port or number information:
• For a Port Channel interface, enter the keywords port-
channel
followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is
1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0.2.0 Introduced on the S6000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series. Increased the name string to
accept up to 140 characters. Prior to version 7.8.1.0, names
are up to 16 characters long.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
Field Description
“Ingress IPv6...” Displays the name of the IPv6 ACL, in this Example
“AclList1”.
“seq 10...” Displays the filter. If the keywords count or byte were
configured in the filter, the number of packets or bytes
processed by the filter is displayed at the end of the line.
Example
Dell#show ipv6 accounting access-list
!
Ingress IPv6 access list AclList1 on GigabitEthernet 9/0
Total cam count 15
seq 10 permit icmp host 3333:: any mobile-advertisement log
seq 15 deny tcp any any rst
seq 20 permit udp any any gt 101 count (0 packets)
IPv6 Access Control Lists (IPv6 ACLs)
1027