Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5000

1011

characters. Prior to version 7.8.1.0, names are up to 16

characters long.

StartingSeqNu

Enter the starting sequence number to resequence. The

range is 0 to 4294967290.

Step-to-

Increment

Enter the step to increment the sequence number. The

range is 1 to 4294967290.

Defaults none

Command

Modes

• EXEC

• EXEC Privilege

Command

History

Version 9.0.2.0 Introduced on the S6000.

Version 8.4.2.0 Introduced on the S-Series.

Version 8.2.1.0 Introduced on the E-Series ExaScale.

Version 7.8.1.0 Introduced on the C-Series.

Version 7.4.1.0 Introduced on the E-Series TeraScale.

Usage

Information

When all sequence numbers have been exhausted, this feature permits re-

assigning new sequence number to entries of an existing access-list.

Commands

resequence prefix-list ipv6 – resequences a prefix list.

resequence prefix-list ipv6

Re-assign sequence numbers to entries of an existing prefix list.

C-Series, E-Series, S-Series

Syntax

resequence prefix-list ipv6 {prefix-list-name StartingSeqNum

Step-to-increment}

Parameters

prefix-list-

name

Enter the name of configured prefix list, up to 140

characters. Increased the name string to accept up to 140

characters. Prior to version 7.8.1.0, the names are up to 16