Reference Guide

description Enter a description of up to 80 characters.
Defaults Not configured.
Command
Modes
ACCESS-LIST
Command
History
Version 9.0.2.0 Introduced on the S6000.
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
As shown in the Example below, the same sequence number is used for the remark
and an ACL rule. The remark precedes the rule in the running-configuration
because it is assumed that the remark is for that rule or that group of rules that
follow the remark. You can configure up to 4294967290 remarks in a given ACL.
Example
Dell(config-ipv6-acl)#remark 10 Remark for Entry # 10
Dell(config-ipv6-acl)#show config
!
ipv6 access-list Acl1
description IPV6 Access-list
seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count
bytes
remark 10 Remark for Entry # 10
seq 10 permit icmp host 3333:: any mobile-advertisement log
seq 15 deny tcp any any rst
seq 20 permit udp any any gt 100 count
Dell(config-ipv6-acl)#
Related
Commands
show config – displays the current ACL configuration.
resequence access-list
Re-assign sequence numbers to entries of an existing access-list.
C-Series, E-Series, S-Series
Syntax
resequence access-list {ipv4 | ipv6 | mac} {access-list-name
StartingSeqNum Step-to-Increment}
Parameters
ipv4 | ipv6 |
mac
Enter the keyword ipv4, ipv6 or mac to identify the access
list type to resequence.
access-list-
name
Enter the name of a configured IP access list, up to 140
characters. Increased name string to accept up to 140
IPv6 Access Control Lists (IPv6 ACLs)
1019