Install Guide

Installation

This document contains the following sections:

• Before You Begin

• Install the S5000 Chassis in a Rack or Cabinet

• Attaching the Mounting Brackets

• Rack Mounting Safety Considerations

• Installing the S5000 Chassis into a 4-post rack or cabinet

• Rack Grounding

• Important Points to Remember for Installing an Ethernet Module

• Installing an Ethernet Module

• Replacing an Ethernet Module

• Important Points to Remember to Install a Fan Module

• Installing a Unied Port Module

• Replacing a Unied Port Module

• Important Points to Remember for Installing an AC Power Supply

• Installing an AC Power Supply

• Important Points to Remember for Installing a DC Power Supply

• Assembling and Connecting the Safety Ground Wire for DC Power Supply

• Installing a DC Power Supply

• Installing the Ferrite Bead for DC Power and Return Cables

• Securing The Power Cable(s)

• Replacing an AC or DC Power Supply

• Important Points to Remember for Installing a Fan Module

• Installing a Fan Module

• Replacing a Fan Module

• Installing the SFP+ and QSFP+ Optics

• Splitting QSFP+ Ports to SFP+ Ports

• Connecting the Stacking Ports (Optional)

• Connecting Two S5000 Systems

• Connecting Three S5000 Systems

• Supplying Power and Powering Up the System

• Hot-Swapping Units in a Stack

Before You Begin

Before installing the switch, verify that you meet these guidelines:

• Enough clearance to the front of the switch so you can read the LEDs.

• AC/DC power cord reaches from the power outlet to the Utility-panel connector.

• Switch is rack-mounted before you install the power supply modules.