Users Guide

show system
Display the status of all stack members or a specic member.
Syntax
show system [brief | stack-unit unit-id | stack-ports {status | topology}]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of system information.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit then the stack member ID for information on
that stack member. The unit ID range for the S4820T is from 0 to 11.
stack-ports status |
topology
(OPTIONAL) Enter the keywords stack-ports for information about the status or topology
of the stack ports.
NOTE: This option applies to the S4810 or S4820T system only.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell Networking OS
Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for the disabled-ports parameter .
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 The brief parameter no longer displays the current Reload mode. To display Reload mode, use
the show reload-type command. Modied the show system stack-unit command
output to support Piece Part ID (PPID).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 The Boot Flash eld displays the code level for boot code 2.8.1.1 and newer, while older boot
codes display as "Present".
7.7.1.0 Added Master Priority eld.
7.6.1.0 Introduced on the S-Series.
Example (show
system stack unit –
disabled ports)
Example (show
system brief)
Dell#show system brief
Stack MAC : 90:b1:1c:f4:9b:79
Reload-Type : normal-reload [Next boot : normal-reload]
142
Control and Monitoring