Reference Guide

Stacking | 931
Display information about an S4810 or S4820T stack using the show system command.
Force10#show system
Stack MAC : 00:01:e8:8a:df:e6
Reload Type : normal-reload
-- Unit 0 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : S4810 - 52-port GE/TE/FG (SE)
Current Type : S4810 - 52-port GE/TE/FG (SE)
Master priority : 0
Hardware Rev : 3.0
Num Ports : 64
Up Time : 57 min, 0 sec
FTOS Version : 8-3-7-13
Jumbo Capable : yes
POE Capable : no
Burned In MAC : 00:01:e8:8a:df:e6
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus
---------------------------------------------------------------------------
0 0 absent absent
0 1 up AC up
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
--------------------------------------------------------------------------------
0 0 up up 6960 up 6960
0 1 up up 6720 up 6720
Speed in RPM
-- Unit 1 --
Unit Type : Member Unit
Status : not present
Required Type : S4810 - 52-port GE/TE/FG (SE)
-- Unit 2 --
Unit Type : Member Unit
Status : not present
-- Unit 3 --
Display most of the information in show
system
, but in a more convenient tabular
form. See the example below.
show system brief
EXEC Privilege
Display the same information in show
system
, but only for the specified unit. See
the example below.
show system stack-unit
EXEC Privilege
Display topology and stack link status for
the entire stack. The available options
separate the
show system stack-port
output into topology information from link
status information. See the example below.
show system stack-ports [status | topology] EXEC Privilege
Task Command Syntax Command Mode