Reference Guide

Link Layer Discovery Protocol (LLDP) | 619
Figure 29-8. Configuring LLDP
Viewing the LLDP Configuration
Display the LLDP configuration using the command show config in either the CONFIGURATION or
INTERFACE mode, as shown in Figure 29-9 and Figure 29-10, respectively.
Figure 29-9. Viewing LLDP Global Configurations
R1(conf)#protocol lldp
R1(conf-lldp)#show config
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description
hello 10
no disable
R1(conf-lldp)#