Reference Guide

Getting Started | 55
22 -rwx 30659825 Oct 05 2012 10:32:54 +00:00 1
23 -rwx 28615614 Oct 05 2012 08:58:26 +00:00 fiel1
24 -rwx 30659825 Oct 05 2012 10:32:30 +00:00 file2
25 -rwx 1000000000 Oct 05 2012 10:14:30 +00:00 s4820junk1
26 -rwx 1000000000 Oct 05 2012 10:18:26 +00:00 s4820junk2
27 -rwx 28615614 Oct 05 2012 10:30:06 +00:00 s4820t-FTOS5-SE-1-0-0-26file
30 -rwx 28615614 Oct 05 2012 10:31:36 +00:00 s4820t-FTOS5-SE-1-0-0-26file1
34 -rwx 30659825 Oct 05 2012 10:33:02 +00:00 2
35 -rwx 30659825 Oct 05 2012 10:33:08 +00:00 3
36 -rwx 30659825 Oct 05 2012 10:33:26 +00:00 4
37 -rwx 16644007 Oct 05 2012 11:22:56 +00:00 file19
39 -rwx 130000 Oct 05 2012 11:27:20 +00:00 junkfile1
usbflash: 4040642560 bytes total (151228416 bytes free)
To view the contents of a file:
View Configuration Files
Configuration files have three commented lines at the beginning of the file, as shown in the example
below, to help you track the last time any user made a change to the file, which user made the changes, and
when the file was last saved to the startup-configuration.
In the running-configuration file, if there is a difference between the timestamp on the “Last configuration
change,” and “Startup-config last updated,” then you have made changes that have not been saved and will
not be preserved upon a system reboot.
FTOS#show running-config
Current Configuration ...
! Version 8.2.1.0
! Last configuration change at Thu Apr 3 23:06:28 2008 by admin
! Startup-config last updated at Thu Apr 3 23:06:55 2008 by admin
!
boot system rpm0 primary flash://FTOS-EF-8.2.1.0.bin
boot system rpm0 secondary flash://FTOS-EF-7.8.1.0.bin
boot system rpm0 default flash://FTOS-EF-7.7.1.1.bin
boot system rpm1 primary flash://FTOS-EF-7.8.1.0.bin
boot system gateway 10.10.10.100
Step Task Command Syntax Command Mode
1 View the:
EXEC Privilege
contents of a file in the internal flash of
an RPM
show file rpm{0|1}flash://filename
contents of a file in the external flash
of an RPM
show file rpm{0|1}slot0://filename
running-configuration
show running-config
startup-configuration
show startup-config