Reference Guide

260 | Bare Metal Provisioning 2.0
www.dell.com | support.dell.com
c If the configuration file is downloaded from the server, any saved startup-configuration on the
flash is ignored. If no configuration file is downloaded from the server or the
config-download
parameter is disable, the startup-configuration file on the flash is loaded as in normal reload.
6. When the FTOS image and the configuration file have been downloaded, the IP address is released.
00:04:06: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE: DHCP RELEASE sent on Fo 0/56.
00:04:06: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Fo 0/56
7. The switch applies the configuration. The switch is now up and running. It can be managed as usual.