Reference Guide

1456 | Storm Control
www.dell.com | support.dell.com
Example
FTOS#show storm-control multicast gigabitethernet 1/0
Multicast storm control configuration
Interface Direction Packets/Second
-----------------------------------------------
Gi 1/0 Ingress 5
FTOS#
show storm-control unknown-unicast
c e s
Display the storm control unknown-unicast configuration
Syntax
show storm-control unknown-unicast [interface]
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
interface
(OPTIONAL) Enter one of the following interfaces to display the interface specific
storm control configuration.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed
by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the
slot/port information.
• For a SONET interface, enter the keyword
sonet followed by the slot/port
information.
• Fast Ethernet is not supported.
Version 8.3.19.0 Introduced on S4820T
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on S-Series
Version 7.5.10 Introduced on C-Series
Version 6.5.1.0 Introduced on E-Series