Reference Guide

Field Description
• ok — the entry is valid.
• ex — the entry expired.
• ?? — the entry is suspect.
TTL Displays the amount of time until the entry ages out of the cache. For
dynamically learned entries only.
Type Displays IP as the type of entry.
Address Displays the IP addresses assigned to the host.
Example
FTOS#show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host Flags TTL Type Address
-------- ----- ---- ---- -------
ks (perm, OK) - IP 2.2.2.2
4200-1 (perm, OK) - IP 192.68.69.2
1230-3 (perm, OK) - IP 192.68.99.2
ZZr (perm, OK) - IP 192.71.18.2
Z10-3 (perm, OK) - IP 192.71.23.1
FTOS#
Related
Commands
traceroute — views the DNS resolution.
ip host — configures a host.
show ip cam linecard
View CAM entries for a port pipe on a line card.
S4820T
Syntax
show ip cam linecard number port-set pipe-number [ip-address
mask [longer-prefixes] | index index-number | summary | vrf vrf
instance]
Parameters
number Enter the number of the line card.
pipe-number Enter the number of the line card’s port-pipe. The range is from 0 to 1.
ip-address mask
[longer-prefix]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries
for that route only. Enter the keyword longer-prefixes to view
routes with a common prefix.
index index-
number
(OPTIONAL) Enter the keyword index then the CAM index number.
The range depends on CAM size.
summary (OPTIONAL) Enter the keyword summary to view a table listing route
prefixes and the total number of routes that can be entered into the
CAM.
684