Reference Guide

Field Description
assigned dot1p priorities, and bandwidth allocation. If ETS admin
mode is enabled on the remote port for DCBX exchange, the Willing
bit received in ETS TLVs from the remote peer is included.
Local Parameters ETS configuration on local port, including admin mode (enabled
when a valid TLV is received from a peer), priority groups, assigned
dot1p priorities, and bandwidth allocation.
Operational status
(local port)
Port state for current operational ETS configuration:
• Init: Local ETS configuration parameters were exchanged
with the peer.
• Recommend: Remote ETS configuration parameters were
received from the peer.
• Internally propagated: ETS configuration
parameters were received from the configuration source.
ETS DCBX Oper
status
Operational status of the ETS configuration on the local port: match
or mismatch.
State Machine Type Type of state machine used for DCBX exchanges of ETS parameters:
Feature — for legacy DCBX versions; Asymmetric — for an IEEE
version.
Conf TLV Tx Status Status of ETS Configuration TLV advertisements: enabled or
disabled.
ETS TLV Statistic:
Input Conf TLV pkts
Number of ETS Configuration TLVs received.
ETS TLV Statistic:
Output Conf TLV pkts
Number of ETS Configuration TLVs transmitted.
ETS TLV Statistic:
Error Conf TLV pkts
Number of ETS Error Configuration TLVs received.
Example
(Summary)
FTOS(conf-qos-policy-out-ets)#show interface te 0/3 ets de
Interface TenGigabitEthernet 0/3
Max Supported TC Groups is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters :
------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
------------------------------------------------
0 - -
1 0,1,2 100% ETS
2 3 0 % SP
3 4,5,6,7 0 % SP
4 - -
5 - -
6 - -
7 - -
425