Reference Guide

dot1x authentication (Configuration)

Enable dot1x globally. Enable dot1x both globally and at the interface level.

S4820T

Syntax

dot1x authentication

To disable dot1x on a globally, use the no dot1x authentication command.

Defaults Disabled

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.12.0 Introduced on the S4810.

Version 8.3.11.1 Introduced on the Z9000.

Version 7.6.1.0 Introduced on the C-Series and S-Series.

Version 7.4.1.0 Introduced on the E-Series TeraScale.

Commands

dot1x authentication (Interface)

Enable dot1x on an interface. Enable dot1x both globally and at the interface level.