Reference Guide

Related
Commands
rate limit — outgoing traffic rate-limit functionality.
bandwidth-percentage — assigns weight to the class/queue percentage.
bandwidth-weight — assigns a priority weight to a queue.
wred — assigns yellow or green drop precedence.
queue egress
Assign a WRED Curve to all eight egress Multicast queues or designate the percentage for the Multicast bandwidth
queue.
S4820T
Syntax
queue egress multicast linecard {slot number port-set number |
all} [wred-profile name | multicast-bandwidth percentage]
To return to the default, use the no queue egress multicast linecard {slot
number port-set number | all} [wred-profile name | multicast-
bandwidth
percentage] command.
Parameters
linecard number Enter the keyword linecard then the line card slot number.
port-set number Enter the keywords port-set then the line card’s port pipe. The
range is from 0 or 1.
all Enter the keyword all to apply to all line cards.
wred-profile
name
(OPTIONAL) Enter the keywords wred-profile then your WRED
profile name in character format (16 character maximum). Or use one
of the pre-defined WRED profile names.
Pre-defined Profiles: wred_drop, wred-ge_y, wred_ge_g,
wred_teng_y, wred_teng_g.
multicast-
bandwidth
percentage
(OPTIONAL) Enter the keywords multicast-bandwidth then the
bandwidth percentage. The range is from 0 to 100%.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.8.10 Introduced on the S4810.
Version 7.5.1.0 Added support for multicast-bandwidth.
Version 7.4.1.0
and 6.5.3.0
Introduced on the E-Series.
1111