Reference Guide
match-any Determines how packets are evaluated when multiple match criteria
exist. Enter the keywords match-any to determine that the packets
must meet at least one of the match criteria in order to be a member
of the class.
class-map-name Enter a name of the class for the class map in a character format (32
character maximum).
layer2 Enter the keyword layer2 to specify a Layer 2 Class Map. The
default is
Layer 3.
Defaults Layer 3
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant
FTOS Command Line Reference Guide
.
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Class-map names can be 32 characters. Layer2 available on the C-
Series and S-Series.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 E-Series Only: Expanded to add support for Layer 2.
Usage
Information
Packets arriving at the input interface are checked against the match criteria and configured
using this command to determine if the packet belongs to that class. This command accesses
CLASS-MAP mode, where the configuration commands include thematch ip and match
mac options.
Related
Commands
ip access-list extended — configures an extended IP ACL.
ip access-list standard — configures a standard IP ACL.
match ip access-group — configures the match criteria based on the access control list (ACL).
match ip precedence — identifies the IP precedence values as match criteria.
match ip dscp — configures the match criteria based on the DSCP value.
match mac access-group — configures a match criterion for a class map based on the
contents of the designated MAC ACL.
match mac dot1p — configures a match criterion for a class map based on a dot1p value.
match mac vlan — configures a match criterion for a class map based on VLAN ID.
service-queue — assigns a class map and QoS policy to different queues.
show qos class-map — views the current class map information.
1099