Users Guide

debug isis adj-packets
Enable debugging on adjacency-related activity such as hello packets that are sent and received on IS-IS adjacencies.
S4810
Syntax
debug isis [vrf vrf-name] adj-packets [interface]
To turn o debugging, use the no debug isis [vrf vrf-name]adj-packets [interface]
command.
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to enable the
debug information on IS-IS for an adjacency tied to that VRF. This command
displays the IIH related debug details.
interface (OPTIONAL) Identies the interface type slot/port as one of the following:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
•
For a port channel interface, enter the keywords port-channel then a
number.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.2(0.2) Introduced on the Z9000.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
debug isis local-updates
To debug IS-IS local update packets, enable debugging on a specic interface and provides diagnostic information.
S4810
Syntax
debug isis [vrf vrf-name] local-updates [interface]
Intermediate System to Intermediate System (IS-IS)
853