Users Guide

18 0 1312
17 0 1312
16 0 3932
15 0 1312
14 0 1312
13 0 1312
12 0 1312
11 0 1312
10 0 1312
9 0 1312
8 0 1312
7 0 1312
6 0 1312
5 0 1312
4 0 1312
3 0 1312
2 0 1312
1 0 1312
0 0 8
Dell#
show ip cam stack-unit
Display CAM entries for a port-pipe of a stack-unit on a S-Series or Z-Series switch.
Syntax
show ip cam stack-unit {stack-unit-number} [port-set {pipe-number} | vrf vrf-name {ip-
address mask [longer-prefixes [ecmp-group detail]]}| ecmp-group {detail | member-info
[detail [group-index index-number]]}| summary]
Parameters
stack-unit-number Enter the stack-unit ID. The unit ID range is from 0 to 11 for the S4810.The unit ID range is from 0 to 11 for
the S4810.
port-set pipe-
number
Enter the keyword port-set then the number of the stack unit’s port-pipe. The unit ID range is from 0
to 0.
network mask
[longer-prexes
[ecmp-group
detail]]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. You can enter
one of the following keywords to lter results.
• Enter the keyword longer-prefixes to view routes with a common prex.
• Enter the keyword ecmp-group detail to view the ECMP group index.
ecmp-group {detail
| member-info
[detail [group-index
index-number]]}
(OPTIONAL) Enter the keyword ecmp-group then one of the following keywords to lter results.
• Enter the keyword detail to view the ECMP group index.
• Enter the keyword member-info to view the member information for the ECMP group.
• Enter the keyword member-info detail to view detailed ECMP membership and n-hop
information.
• Enter the keyword group-index then the index number to show ECMP membership per group.
The range is from 0 to 1022.
summary (OPTIONAL) Enter the keyword summary to view a table listing route prexes and the total number
routes which can be entered in to CAM.
Command Modes
• EXEC
• EXEC Privilege
IPv4 Routing
783