Users Guide

Version Description
8.3.7.0 Introduced on the S4810.
Pre-version 8.3.7.0 Introduced on the E-Series ExaScale.
Usage Information
If you congure the ip helper-address command and ip udp-helper udp-port command, the
behavior is that the UDP broadcast trac with port numbers 67/68 is unicast relayed to the DHCP server
per the ip helper-address conguration. This occurs regardless if the ip udp-helper udp-port
command contains port numbers 67/68 or not.
If you only congure the ip udp-helper udp-port command, all the UDP broadcast trac is ooded,
including ports 67/68 trac if those ports are part of the udp-port-list.
Related Commands
ip helper-address — congures the destination broadcast or host address for the DHCP server.
debug ip udp-helper — enables debug and displays the debug information on a console.
show ip udp-helper — displays the congured UDP helpers on all interfaces.
show ip udp-helper
Display the congured UDP helpers on all interfaces.
S4810
Syntax
show ip udp-helper
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Pre-version 8.3.7.0 Introduced on the E-Series ExaScale.
Example
Dell#show ip udp-helper
--------------------------------------------------
Port UDP port list
--------------------------------------------------
Te 10/2 656, 658
Te 10/3 All
Related Commands
debug ip udp-helper — enables debug and displays the debug information on a console.
ip udp-broadcast-address — congures a UDP IP address for broadcast.
728
Interfaces