Users Guide

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON. Added support for NFS mount.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on S-Series

7.5.1.0 Introduced on C-Series

E-Series Original command

restore factory-defaults

Restore factory defaults.

Syntax

restore factory-defaults stack-unit {stack—unit—number | all} {clear-all |

bootvar | nvram}

Parameters

factory-defaults Return the system to its factory default mode.

stack-unit-number Enter the stack member unit identier to restore only the mentioned stack-unit. For

the S4810, the range is from 0 to 11.

all Enter the keyword all to restore all units in the stack.

bootvar Enter the keyword bootvar to reset boot line.

clear-all Enter the keywords clear-all to reset the NvRAM, boot environment variables,

and the system startup conguration.

nvram Enter the keyword nvram to reset the NvRAM only.