Users Guide

Version Description
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced
Example
Dell#show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Te 3/2 Up 0 0 20 800 4500 120
Te 3/10 Up 0 0 5 750 2500 20
Dell#
Related Commands
dampening — congures dampening on an interface.
show interfaces — displays information on a specic physical interface or virtual interface.
show interfaces congured — displays any interface with a non-default conguration.
show interfaces phy
Display auto-negotiation and link partner information.
S4810
Syntax
show interfaces gigabitethernet slot/port phy
Parameters
tengigabitethernet Enter the keyword tengigabitethernet then the slot or port information.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the C-Series and S-Series.
6.5.4.0 Introduced on the E-Series.
Usage Information The following describes the show interfaces gigabitethernet command following example.
690
Interfaces