Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4810P
571572573574575576577578579580
To exit from ecmp group mode, use the exit command.
Parameters
percent Indicate the threshold value when trac distribution starts being monitored on an
ECMP link bundle. The range is from 1 to 90%. The default is 60%.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
show cong
Display the ECMP conguration.
S4810
Syntax
show config
Command Modes CONFIGURATION-ECMP-GROUP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related Commands show running-cong ecmp-group — displays interfaces, LAG, or LAG link bundles being monitored for
uneven trac distribution.
574
Equal Cost Multi-Path (ECMP)