Users Guide

ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to clear
the ipv6 unicast routes.
ipv4-address mask (OPTIONAL) Enter an IPv4 address in dotted decimal format and the prex mask in
slash format (/x) to clear dampening information only that BGP neighbor.
ipv6–address mask (OPTIONAL) Enter the IPv6 address and the network mask to clear information on
IPv6 route dampening.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information After you enter this command, the software deletes the history routes and returns the suppressed routes to
the Active state.
The clear ip bgp dampening command does not clear the history paths.
clear ip bgp ap-statistics
Clear BGP ap statistics, which includes number of aps and the time of the last ap.
S4810
Syntax
clear ip bgp [vrf vrf-name] [ipv4 [multicast | unicast] | ipv6 unicast]
[flap-statistics [ipv4-address mask | ipv6–address mask] | filter-list as-
path-name | regexp regular-expression]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF to clear BGP
ap statistics corresponding to that VRF.
NOTE: You can use this attribute on a specic VRF to remove history
routes corresponding to that VRF. You can also use this attribute to return
the suppressed routes corresponding to a specic VRF to an active state.
ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to
clear information related only to ipv4 multicast routes.
360
Border Gateway Protocol