Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4810P
1582158315841585158615871588158915901591
microcode is loaded and VRRP group 10 is congured in VRF 2, the VRID used for the VRRP group is (16
x 10) + 2, or 162. This VRID value is used in the lowest byte of the virtual MAC address of the VRRP
group and is also used for VRF routing.
NOTE: Congure the same VRID on neighboring routers (Dell Networking or non-Dell Networking)
in the same VRRP group in order for all routers to interoperate.
Related Commands virtual-address — assigns up to 12 virtual IP addresses per VRRP group.
Virtual Router Redundancy Protocol (VRRP)
1591