Users Guide

Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.3.2.0 Introduced on the E-Series TeraScale.
Usage Information The following describes the show vrrp ipv6 command shown in the following example.
Line Beginning
with
Description
GigabitEthernet... Displays the Interface, the VRRP group ID, and the network address. If the
interface is no sending VRRP packets, 0.0.0.0 appears as the network address.
VRF VRF instance to which the interface (on which the VRRP group is congured)
belongs.
State: master... Displays the interface’s state:
• Na/If (not available).
• master (MASTER virtual router).
• backup (BACKUP virtual router).
the interface’s priority and the IP address of the MASTER.
Hold Down:... This line displays additional VRRP conguration information:
• Hold Down displays the hold down timer interval in seconds.
• Preempt displays TRUE if preempt is congured and FALSE if preempt is not
congured.
• AdvInt displays the Advertise Interval in seconds.
Adv rcvd:... This line displays counters for the following:
• Adv rcvd displays the number of VRRP advertisements received on the
interface.
• Adv sent displays the number of VRRP advertisements sent on the interface.
• Bad pkts rcvd displays the number of invalid packets received on the interface.
Virtual MAC
address
Displays the virtual MAC address of the VRRP group.
Virtual IP address Displays the virtual IP address of the VRRP router to which the interface is
connected.
Tracking states... Displays information on the tracked interfaces or objects congured for a VRRP
group (track command), including:
• UP or DOWN state of the tracked interface or object (Up or Dn).
• Interface type and slot/port or object number, description, and time since the
last change in the state of the tracked object.
Virtual Router Redundancy Protocol (VRRP)
1589