Users Guide

Parameters
vrrp-id (OPTIONAL) Enter the number of the VRRP group ID to clear the group’s
counters. The range is from 1 to 255.
ipv6 (OPTIONAL) Enter the keyword ipv6 to clear counters from the IPv6 VRRP
group.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Example
Dell#clear counters vrrp vrf jay
Clear "show vrrp" counters of all vrrp groups on all interfaces in VRF jay
[confirm] yes
debug vrrp
Allows you to enable debugging of VRRP.
Syntax
debug vrrp [vrrp-id] {all | bfd | database | interface | ipv6 | packets |
state | timer}
To disable debugging, use the no debug vrrp [vrrp-id] {all | bfd | database |
interface | ipv6 | packets | state | timer} command.
Parameters
vrrp-id (OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID.
all Enter the keyword all to enable debugging of all VRRP groups.
bfd Enter the keyword bfd to enable debugging of VRRP BFD interactions.
database Enter the keyword database to enable debugging of conguration changes.
interface Enter the following keywords and slot/port or number information:
• For Port Channel interface types, enter the keywords port-channel then
the number. The range is from 1 to 128.
Virtual Router Redundancy Protocol (VRRP)
1573