Users Guide
show processes cpu
Display CPU usage information based on processes running.
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit id |
summary | [stack-unit id]]
Parameters
management-unit
1-99 [details]
(OPTIONAL) Display processes running in the control processor. The 1-99 variable
sets the number of tasks to display in order of the highest CPU usage in the past
ve (5) seconds. Add the keyword details to display all running processes
(except sysdlp). Refer to Example (management-unit).
stack-unit id (OPTIONAL) Enter the keyword stack-unit then the stack member ID.
As an option of the show processes cpu command, this option displays CPU
usage for the designated stack member. Or, as an option of the
command, this
option limits the output of memory statistics to the designated stack member. The
unit ID range for the S4810 is from 0 to 11.
Refer to Example (stack-unit).
summary (OPTIONAL) Enter the keywordsummary to view CPU utilization of processes
related to stack-unit processing.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added the keywords management-unit [details].
7.6.1.0 Introduced on the S-Series.
Example
Dell#show processes cpu ?
management-unit Management Unit
stack-unit Unit Number
summary Summary of CPU utilization
| Pipe through a command
Dell#show processes cpu summary
CPU utilization 5Sec 1Min 5Min
-------------------------------------------
UNIT0 3% 3% 1%
136
Control and Monitoring