Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4810P

1351

Related Commands

dot1x port-control — enables port-control on an interface.

dot1x guest-vlan — congures a guest VLAN for non-dot1x devices.

show dot1x interface — displays the 802.1X information on an interface.

dot1x auth-server

Congure the authentication server to RADIUS.

Syntax

dot1x auth-server radius

Defaults none

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the C-Series and S-Series.

7.4.1.0 Introduced on the E-Series.

dot1x guest-vlan

Congure a guest VLAN for limited access users or for devices that are not 802.1X capable.

Syntax

dot1x guest-vlan vlan-id

To disable the guest VLAN, use the no dot1x guest-vlan vlan-id command.

Parameters

vlan-id Enter the VLAN Identier. The range is from 1 to 4094.

Defaults Not congured.

Command Modes CONFIGURATION (conf-if-interface-slot/port)