Users Guide

Usage Information
Use this command to specify the name of the output QoS policy. Once output policy is specied, rate-
shape, scheduler strict, bandwidth-percentage, and WRED can be dened. This command enables the qos-
policy-output conguration mode—(conf-qos-policy-out).
Related Commands
bandwidth-percentage — assigns percentage of bandwidth to the class/queue.
wred — assigns yellow or green drop precedence.
queue egress
Assign a WRED Curve to all eight egress Multicast queues or designate the percentage for the Multicast bandwidth queue.
Syntax
queue egress multicast linecard {slot number port-set number | all} [wred-
profile name | multicast-bandwidth percentage]
To return to the default, use the no queue egress multicast linecard {slot number
port-set number | all} [wred-profile name | multicast-bandwidth percentage]
command.
Parameters
linecard number Enter the keyword linecard then the line card slot number.
port-set number Enter the keywords port-set then the line card’s port pipe. The range is from 0
or 1.
all Enter the keyword all to apply to all line cards.
wred-prole name (OPTIONAL) Enter the keywords wred-profile then your WRED prole name
in character format (16 character maximum). Or use one of the pre-dened WRED
prole names.
Pre-dened Proles: wred_drop, wred-ge_y, wred_ge_g, wred_teng_y,
wred_teng_g.
multicast-
bandwidth
percentage
(OPTIONAL) Enter the keywords multicast-bandwidth then the bandwidth
percentage. The range is from 0 to 100%.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.8.10 Introduced on the S4810.
7.5.1.0 Added support for multicast-bandwidth.
7.4.1.0 and 6.5.3.0 Introduced on the E-Series.
1230
Quality of Service (QoS)