Reference Guide

When you use the no iscsi target port command and the TCP port to be deleted is

one bound to a specific IP address, the IP address value must be included in the command.

show iscsi

Display the currently configured iSCSI settings.

S4810

Syntax

show iscsi

Command Modes

• EXEC

• EXEC Privilege

Command History

Version 8.3.12.0 Introduced on the S4810.

Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.

Example

FTOS#show iscsi

iSCSI is enabled

iSCSI session monitoring is disabled

iSCSI COS : dot1p is 4 no-remark

Session aging time: 10

Maximum number of connections is 256

------------------------------------------------

iSCSI Targets and TCP Ports:

------------------------------------------------

TCP Port Target IP Address

3260

860

Commands

• show iscsi session – displays information about active iSCSI sessions on the switch.

• show iscsi session detailed – displays detailed information about active iSCSI sessions

on the switch.

• show run iscsi – shows run iscsi.

975