Reference Guide

Parameters
* Enter the * to clear (refresh) all routes from the IPv6 routing table.
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Command Modes EXEC Privilege
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
clear ipv6 mld_host
Clear the IPv6 MLD host counters and reset the elapsed time.
S4810
Syntax
clear ipv6 mld_host
Command Modes EXEC
Command History
Version 8.3.12.0 Introduced on the S4810.
ipv6 address autoconfig
Configure IPv6 address auto-configuration for the management interface.
S4810
Syntax
ipv6 address autoconfig
To disable the address autoconfig operation on the management interface, use the no ipv6
address autoconfig command.
Default Disabled
948