Reference Guide

byte (OPTIONAL) Enter the keyword byte to count bytes processed by
the filter.
log (OPTIONAL) Enter the keyword log to enter ACL matches in the log.
Supported on Jumbo-enabled line cards only.
monitor (OPTIONAL) Enter the keyword monitor to monitor traffic on the
monitoring interface specified in the flow-based monitoring session
along with the filter operation.
Defaults Not configured.
Command Modes ACCESS-LIST
Command History
Version 8.4.2.1 Introduced on the E-Series TeraScale and S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added the monitor option.
Related
Commands
deny – configures a filter to drop packets.
permit – configures a filter to forward packets.
show cam-acl
Show space allocated for IPv6 ACLs.
C-Series, E-Series, S-Series, S4810
Syntax
show cam-acl
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.7.0 Introduced on the S4810.
Version 8.4.2.1 Introduced on the S-Series.
Version 8.4.2.0 Introduced on the E-Series TeraScale.
Version 7.8.1.0 Introduced on the C-Series.
Example
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 5
Ipv4Acl : 6
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
-- Line card 4 --
935