Reference Guide

mac [ source-mac
| source-port-id |
source-module-id
| dest-mac | dest-
port-id | dest-
module-id | vlan |
ethertype |
source-dest-
mac ]
To use MAC key fields in hash computation, enter the keyword mac
followed by one of the parameters:
• source-mac—Use source-mac field in hash calculation.
• source-port-id—Use src-port-id field in hash calculation.
• source-module-id—Use src-module-id field in hash
calculation.
• dest-mac—Use dest-mac field in hash calculation.
• dest-port-id—Use dest-port-id field in hash calculation.
• dest-module-id—Use dest-module-id field in hash
calculation.
• vlan—Use vlan field in hash calculation .
• ethertype—Use Ethertype field in hash calculation.
• source-dest-mac—Use SMAC and DMAC fields in hash
calculation.
tunnel [ ipv4-over-
ipv4 | ipv4-over-
gre-ipv4 | mac-in-
mac ]}
To use tunnel key fields in hash computation, enter the keyword
tunnel followed by one of the parameters:
• ipv4-over-ipv4—Use ipv4-over-ipv4 field in hash calculation.
• ipv4-over-gre-ipv4—Use ipv4-over-gre-ipv4 field in hash
calculation.
• mac-in-mac—Use mac-in-mac field in hash calculation.
Defaults IP selection 5-tuples (source-ip dest-ip vlan protocol L4-source-port L4-dest-port).
Command Modes CONFIGURATION
Command History
Version 9.0.0.0 Added support for IPv6.
Version 8.3.11.4 Introduced on the Z9000.
management route
Configure a static route that points to the Management interface or a forwarding router.
C-Series, E-Series, Z-Series, S4810
Syntax
management route {{ip-address mask | {ipv6-address prefix-
length}} {forwarding-router-address | managementethernet}
To remove a static route, use the no management route{{ip-address mask |
{ipv6-address prefix-length}}{forwarding-router-address |
managementethernet} command.
Parameters
ip-address mask Enter an IP address (dotted decimal format) and mask (/prefix format)
of the destination subnet.
880