Reference Guide

Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
FTOS#show bootvar
PRIMARY IMAGE FILE = ftp://box:password@10.31.1.205//home/
5.3.1/5.3.1.0/FTOS-ED-RPM1-5.3.1.0.bin
SECONDARY IMAGE FILE = variable does not exist
DEFAULT IMAGE FILE = flash://FTOS-ED-5.3.1.0.bin
LOCAL CONFIG FILE = variable does not exist
PRIMARY HOST CONFIG FILE = variable does not exist
SECONDARY HOST CONFIG FILE = variable does not exist
PRIMARY NETWORK CONFIG FILE = variable does not exist
SECONDARY NETWORK CONFIG FILE = variable does not exist
CURRENT IMAGE FILE = ftp://box:password@10.31.1.205//home/
5.3.1/5.3.1.0/FTOS-ED-RPM1-5.3.1.0.bin
CURRENT CONFIG FILE 1 = flash://startup-config
CURRENT CONFIG FILE 2 = variable does not exist
CONFIG LOAD PREFERENCE = local first
BOOT INTERFACE GATEWAY IP ADDRESS = variable does not exist
FTOS#
Related
Commands
boot config – sets the location of configuration files on local devices.
boot host – sets the location of configuration files from the remote host.
boot network – sets the location of configuration files from a remote network.
boot system – sets the location of FTOS image files.
boot system gateway – specifies the IP address of the default next-hop gateway for the
management subnet.
show file
Display contents of a text file in the local filesystem.
C-Series, E-Series, S-Series, Z-Series
Syntax
show file filesystem
Parameters
filesystem Enter one of the following:
• For internal flash, enter flash:
• For external Flash, enter slot0:
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on the S-Series
85