Reference Guide

Field Description
Protocol States whether IP is enabled (up) or disabled (down) on the
interface.
Description Displays the description (if any) manually configured for the
interface.
Example
FTOS>
Interface OK? Status Protocol Description
GigabitEthernet 4/17 NO admin down down ***connected-to-
host***
GigabitEthernet 4/18 NO admin down down ***connected-to-Tom***
GigabitEthernet 4/19 NO admin down down ***connected-to-
marketing***
GigabitEthernet 4/20 NO admin down down ***connected-to-
Bill***
GigabitEthernet 4/21 NO up down ***connected-to-Radius-
Server***
GigabitEthernet 4/22 NO admin down down ***connected-to-Web-
Server***
GigabitEthernet 4/23 NO admin down down ***connected-to-PC-
client***
TenGigabitEthernet 6/0 NO admin down down
GigabitEthernet 8/0 YES up up
GigabitEthernet 8/1 YES up up
GigabitEthernet 8/2 YES up up
GigabitEthernet 8/3 YES up up
GigabitEthernet 8/4 YES up up
GigabitEthernet 8/5 YES up up
GigabitEthernet 8/6 YES up up
GigabitEthernet 8/7 YES up up
GigabitEthernet 8/8 YES up up
GigabitEthernet 8/9 YES up up
GigabitEthernet 8/10 YES up up
GigabitEthernet 8/11 YES up up
FTOS>
Related
Commands
show interfaces – displays information on a specific physical interface or virtual interface.
show interfaces linecard
Display information on all interfaces on a specific line card.
C-Series, E-Series
Syntax
show interfaces linecard slot-number
Parameters
slot-number Enter a number for the line card slot. For the C-Series, the range is 0
to 7 for C300 and 0 to 3 for C150. For the E-Series, the range is 0 to 13
on the E1200/1200i, 0 to 6 on the E600/600i, and 0 to 5 on the E300.
Command Modes EXEC Privilege
Command History
Version 8.1.1.2 Introduced support on the E-Series ExaScale E600i.
810