Reference Guide

link debounce-timer
Assign the debounce time for link change notification on this interface.
E-Series
Syntax
link debounce [milliseconds]
Parameters
milliseconds Enter the time to delay link status change notification on this
interface. The range is 100 to 5000 ms. The default for copper is 3100
ms. The default is for fiber is 100 ms.
Command Modes INTERFACE
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the E-Series.
Usage
Information
Changes do not affect any ongoing debounces. The timer changes take affect from the next
debounce onward.
monitor interface
Monitor counters on a single interface or all interfaces on a line card. The screen is refreshed every five seconds and
the CLI prompt disappears.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
monitor interface [interface]
To disable monitoring and return to the CLI prompt, press the q key.
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number
information:
• For an 100/1000 Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For the management port, enter the keyword
managementethernet followed by the slot (0-1) and the
port (0).
• For a SONET interface, enter the keyword sonet followed by
the slot/port.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
789