Reference Guide

need to be routed. You must assign an IP address to the VLAN interface for the switch to act as
a querier for this VLAN.
show ip igmp snooping mrouter
Display multicast router interfaces.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show ip igmp snooping mrouter [vlan number]
Parameters
vlan number Enter the keyword vlan followed by the vlan number. The range is 1
to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command.
Usage
Information
If the port channel is a VLT port channel, an asterisk (*) after the port channel number (Po 100*)
indicates the port channel is locally down and that a remote VLT port is up.
Example
FTOS#show ip igmp snooping mrouter
Interface Router Ports
Vlan 2 Gi 13/3, Po 1
FTOS#
Related
Commands
• ip igmp snooping mrouter – Use this command to configure a static connection to the
multicast router.
• show ip igmp groups – use this IGMP command to view groups.
766