Reference Guide

Command Modes CONFIGURATION

Command History

Version 8.4.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP.

Version 7.5.1.0 Introduced on the C-Series

Version 6.1.1.0 Introduced

Usage

Information

In this streamline copy command, the source image is copied to the primary RPM and

then, if specified, to the standby RPM. After the copy is complete, the new image file path on

each RPM is automatically configured as the primary image path for the next boot. The current

system image (the one from which the RPM booted) is automatically configured as the

secondary image path.

FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP.

NOTE: The keywords boot-image, synchronize-rpm, and external are used on

the Primary RPM only.

copy running-config startup-config

Copy running configuration to the startup configuration.

C-Series, E-Series

Syntax

copy running-config startup-config {duplicate}

Command Modes EXEC Privilege

Command History

Version 7.5.1.0 Introduced on the C-Series

Version 6.3.1.0 Introduced

Usage

Information

This command is useful for quickly making a changed configuration on one chassis available

on external flash in order to move it to another chassis.

When you use the copy running-config startup-config duplicate command

to copy the running configuration to the startup configuration, FTOS creates a backup file on

the internal flash of the startup configuration.