Reference Guide

Parameters
number Enter the number of IGMP groups permitted to join in a second. The
range is 1 to 10000.
Defaults none
Command Modes CONFIGURATION (conf-if- interface-slot/port )
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
Version 7.6.1.0 Introduced on the E-Series.
ip igmp immediate-leave
Enable IGMP immediate leave.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
ip igmp immediate-leave [group-list prefix-list-name]
To disable ip igmp immediate leave, use the no ip igmp immediate-leave
command.
Parameters
group-list prefix-
list-name
Enter the keywords group-list followed by a string up to 16
characters long of the prefix-list-name.
Defaults Not configured.
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
Querier normally sends a certain number of group-specific queries when a leave message is
received for a group prior to deleting a group from the membership database. There may be
situations when you require immediate deletion of a group from the membership database. This
command provides a way to achieve the immediate deletion. In addition, this command
provides a way to enable immediate-leave processing for specified groups.
752