Reference Guide

17
FIPS Cryptography
The following commands are used to configure Federal Information Processing Standards (FIPS) Cryptography on the
S4810 and Z-Series platforms.
FIPS
• fips mode enable
• show fips status
• show ip ssh
• ssh
fips mode enable
Enable the FIPS cryptography mode on the platform.
Z-Series, S4810
Syntax
[no] fips mode enable
Use the no fips mode enable command to disable the FIPS cryptography mode.
Default Disabled
Command Modes CONFIGURATION
Example
FTOS (conf)#fips mode enable
WARNING: Enabling FIPS mode will close all SSH/Telnet
connection, restart those servers, and destroy all configured
host keys.
proceed (y/n) ? y
FTOS (conf)#
Command History
Version 9.1(0.0) Introduced on the Z9000.
Version 8.3.12.0 Introduced on the S4810.
Related
Commands
ip ssh server Configure an SSH server.
693