Reference Guide
• xor2: Use CRC16_BISYNC_AND_XOR2 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor2
• xor4: Use CRC16_BISYNC_AND_XOR4 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor4
• xor8: Use CRC16_BISYNC_AND_XOR8 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor8
• xor16: Use CR16 - 16 bit XOR
hg {
crc16
|
crc16cc
|
crc32MSB
|
crc32LSB
|
xor1
|
xor2
|
xor4
|
xor8
|
xor16
} stack-unit
stack-unit-
number
| port-set
port-pipe
Z-Series only: Enter the keyword hg followed by one of the following
options:
• crc16: Use CRC16_BISYNC - 16 bit CRC16-bisync polynomial
(default)
• crc16cc: Use CRC16_CCITT - 16 bit CRC16 using CRC16-
CCITT polynomial
• crc32MSB: Use CRC32_UPPER - MSB 16 bits of computed
CRC32
• crc32LSB: Use CRC32_LOWER - LSB 16 bits of computed
CRC32
• xor1: Use CRC16_BISYNC_AND_XOR1 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor1
• xor2: Use CRC16_BISYNC_AND_XOR2 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor2
• xor4: Use CRC16_BISYNC_AND_XOR4 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor4
• xor8: Use CRC16_BISYNC_AND_XOR8 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor8
• xor16: Use CR16 - 16 bit XOR
Enter the keywords stack-unit, followed by a stack-unit number,
to specify a stack-unit. The range is 0 to 7.
Enter the keywords port-set port-pipe followed by the port
pipe number. The range is 0 to 5.
hg-seed
seed-
value stack-unit
Z-Series only: Enter the keywords hg-seed followed by the hash
algorithm seed value. The range is 0 to 2147483646.
Enter the keywords stack-unit followed by the stack unit number.
The range is 0 to 7.
Enter the keywords port-set followed by the line card’s port-pipe
number. The range is 0 to 5.
lag
hash
algorithm value
TeraScale and ExaScale Only: Enter the keyword lag followed by the
LAG hash algorithm value. The range is 0 to 47.
nh-ecmp
hash
algorithm value
E-Series only: (OPTIONAL) Enter the keyword nh-ecmp followed by
the ECMP hash algorithm value.
linecard
number
E-Series only: (OPTIONAL) TeraScale and ExaScale Only: Enter the
keywordlinecard followed by the linecard slot number. The range
is:
• 0 to 13 on an E1200/E1200i
683